Methane dehydroaromatization with periodic CH4-H2 switch:A promising process for aromatics and hydrogen

Long-term stability test of Mo/HZSM-5-N catalysts(HZSM-5-N stands for nano-sized HZSM-5) in methane dehydroaromatization(MDA)reaction has been performed with periodic CH4-H2 switch at 1033-1073 K for more than 1000 h.During this test,methane conversion ranges from 13% to 16%,and mean yield to aromatics(i.e.benzene and naphthalene) exceeds 10%.N2-physisorption,XRD,NMR and TPO measurements were performed for the used Mo/HZSM-5 catalysts and coke deposition,and the results revealed that the periodic hydrogenation can effectively suppress coke deposition by removing the inert aromatic-type coke,thus ensuring Mo/HZSM-5 partly maintained its activity even in the presence of large amount of coke deposition.The effect of zeolite particle size on the catalytic activity was also explored,and the results showed that the nano-sized zeolite with low diffusion resistance performed better.It is recognized that the size effect was enhanced by reaction time,and it became more remarkable in a long-term MDA reaction even at a low space velocity.     

Hyperchaos,quasi-period and coexisting behaviors in second-order-memristor-based jerk circuit

The European Physical Journal Special Topics - This paper generalizes a second-order-memristor-based jerk circuit, which is achieved by substituting the first-order memristor contained diode-bridge...     

非晶态固体的结构可以决定性能吗?

晶态固体的力学性能与塑性变形主要由结构缺陷, 比如位错的运动决定. 而在非晶态固体中结构如何决定性能, 仍然是固体力学、材料学和凝聚态物理学共同关心但尚未解决的核心问题之一.传统材料学研究的经典范式为"结构决定性能". 遵循这一信条, 已经有大量的实验表征与理论、模拟研究, 尝试将非晶态固体的某种结构特征与性能建立一一对应关系. 但是, 科学界对于非晶固体结构-性能关系成立与否, 以及背后隐藏的规律知之甚少. 本文针对非晶态固体的变形机制以及其微结构特征, 基于分子动力学模拟, 定量评估短程简单结构与中长程复杂结构在决定非晶态固体动力学性能方面的效用. 通过海量抽样每种具体玻璃结构的激活能(标识激发难易程度), 尝试将结构参数与激活能建立定量关系, 从而揭示出非晶态固体结构-性能关系的隐藏主控因素为结构的空间关联, 受限比几何结构本身更关键. 只有某种结构在空间上呈现亚纳米级的空间关联长度, 这种完备结构才有可能有效地决定非晶态固体的力学性能, 而短程简单结构则无效. 进一步, 给出了评价非晶态固体结构预测性能有效性的普适定量方法, 为建立广义无序物质的结构-性能关系提供了筛选准则.      

变角度纤维复合材料层合斜板的颤振分析

假设纤维方向角沿层合板的长度方向线性变化，研究了变角度纤维复合材料层合斜板的颤振．通过坐标变换将斜板变换为正方形板，采用层合板表面连续变化的速度环量来模拟空气对其的作用，速度环量分布利用Cauchy积分公式计算．建立了系统的Lagrange方程并采用Ritz法得到了层合板的自振频率和颤振/不稳定性分离临界速度．通过数值算例验证了本文模型和方法的正确性和收敛性，分析了各个铺层内纤维方向角的变化对自振频率和颤振/不稳定性分离临界速度的影响．研究结果表明，通过纤维的变角度铺设，可有效地提高层合板的基频和颤振/不稳定性分离临界速度．经合理设计的变角度复合材料层合板具有抑制颤振的作用．     

Gold-Catalyzed Divergent Ring-Opening Rearrangement of Cyclopropenes Enabled by Dichotomous Gold−Carbenes

The gold-catalyzed ring-opening rearrangement of cyclopropenes affords an efficient route to either polysubstituted naphthols or aryl-substituted furans. Owing to the unique dichotomy of gold−carbenes, this protocol provides a switchable reaction selectivity between naphthols and furans enabled by the use of TFP−Au(MeCN)SbF₆ (tri(2-furyl) phosphine) or PNP(AuNTf₂)₂ (bis(diphenylphosphino)(isopropyl) amine) as catalysts respectively. It is proposed that the gold−carbene intermediate might be involved in the cyclopropene→naphthol rearrangement while the gold-carbocation is more likely to be involved in the cyclopropene→furan rearrangement.     

Developing Flexible Quinacridone-Derivatives-Based Photothermal Evaporaters for Solar Steam and Thermoelectric Power Generation

Solar-driven interfacial vaporization by localizing solar-thermal energy conversion to the air−water interface has attracted tremendous attention. In the process of converting solar energy into heat energy, photothermal materials play an essential role. Herein, a flexible solar-thermal material di-cyan substituted 5,12-dibutylquinacridone (DCN−4CQA)@Paper was developed by coating photothermal quinacridone derivatives on the cellulose paper. The DCN−4CQA@Paper combines desired chemical and physical properties, broadband light-absorbing, and shape-conforming abilities that render efficient photothermic vaporization. Notably, synergetic coupling of solar-steam and solar-electricity technologies by integrating DCN−4CQA@Paper and the thermoelectric devices is realized without trade-offs, highlighting the practical consideration toward more impactful solar heat exploitation. Such solar distillation and low-grade heat-to-electricity generation functions can provide potential opportunities for fresh water and electricity supply in off-grid or remote areas.